Ngwaahịa

Ụgbọ ala dual redio nkwụnye ụgbọ ala njikota USB factory

Nkọwa maka ihe a

Nọmba nlereanya: KY-C112

Aha ngwaahịa: eriri waya akpaaka

①FAKRA okpukpu abụọ nwanyị kwụ ọtọ njikọ 8.0 pitch, ọcha 5.0 ọla kọpa tube nke nwere akụkụ isii (Huaxing Tongda)

②φ5.5*15 Black Heat Shrinkable tube

φ1.0 * 3 ojii okpomọkụ shrinkable aka uwe

③ Ihe mmado nwere koodu QR / koodu na-agba ọsọ “Fox dual radio cable XP01V0739R0″ akwụkwọ sịntetik (polypropylene) mkpụrụedemede ojii na ndabere ọcha (ogologo: 100mm obosara: 20mm)

④φ4.6 ojii {[(11/0.16TS+HDPE ọcha ID:2.6mm)*1C+aluminom foil]+ waya braided (16/3/0.12TS)}+ PVC na-enweghị mbipụta L=140mm

⑤FAKRA nwoke njikọ ụdị B ọcha 5.0 ọla kọpa tube anọ set (Huaxing Tongda)

⑥FAKRA nwoke njikọ Z ụdị ojii 5.0 ọla kọpa tube anọ set (Huaxing Tongda)


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ihe achọrọ:

1. Ike njide nke waya na ọdụ antenna: ≥5.0KG. Ike njide nke shei antenna na ọnụ: ≥3.5KG.

Nnwale:

1. a.100% nduzi, obere sekit, oghere oghere, nkwụsịtụ, mkpuchi na-eguzogide ule voltaji;

b. Mgbochi mkpuchi: ≥10MΩ, DC 500V, 0.01S;

c. Na nguzogide: ≤3Ω;

d. Iguzogide voltaji: AC 350V I: 1mA T: 0.1S;

2. Oge ule sekit dị mkpirikpi ozugbo ≥ 3 sekọnd.

Foto-7
Foto-6
g Foto-4

ngwugwu:

1. A na-ejikọta ngwaahịa ahụ na ihe nkiri PE ọ bụla 25PCS, na akara ndị ahụ kwesịrị ịkwado nke ọma.

2. Ngwaahịa a juru n'ọnụ na-acha ọcha transperent PE akpa (ọnụọgụ dabeere n'ezie ibu), obosara bụ: 324mm, ọkpụrụkpụ: 0.06mm. (Nkeji No.: 3040016101) Ogologo dị n'okpuru ogologo oge achọrọ. A na-apịaji oghere ahụ na ọkara ma mechie ya na gluu transperent. Mgbe echichi gasịrị, a na-ejikọta onye ọkà ihe ọmụma maka akara nnyefe na ọnọdụ etiti.

3. A na-etinye ngwaahịa ahụ na katọn nke ọkara 48.5 * 34 * 22CM H838D (nọmba akụkụ 3010002202) (ọnụọgụ nkwakọ na-adabere na ọnụ ọgụgụ n'ezie); mgbe mbukota, jide lable nke feige ahịa na elu aka ekpe nke akụkụ nke elu igbe.

Okwu:

1.Ekwesịrị ịkpụcha jaket dị n'elu nke njedebe P1 na 17 ± 1mm, bee braid nke ọma, debe waya ala, ma kpuchie aka uwe 0.8 * 15mm; A na-ewepụ jaket abụọ ahụ n'etiti 5 ~ 6mm, gbagọrọ agbagọ n'ime waya ala, ma kpuchie ya na 0.8 * 10mm aka uwe n'otu n'otu; A na-eji ogwe aka dị n'etiti 2.0 * 8mm na 2.5 * 8mm mee ihe n'otu n'otu. Ọ dị mma ịkpụ ogologo waya ala. buru ụzọ kụọ otu waya isi na waya ala, wee kpuchie ụkwụ ịgbado ọkụ na aka uwe 1.5*8mm n'otu n'otu. Mgbe ahụ weld ndị ọzọ isi wires, na-ekpuchi ịgbado ọkụ ụkwụ na 1.5 * 5mm aka uwe karị, na aka uwe na-ekpuchi solder nkwonkwo maka okpomọkụ shrinkage.

2.The elu jaket nke P2 ọgwụgwụ kwesịrị peeled ka 34 ± 1mm, bee braid ọcha, na-ala waya, na-ekpuchi 0.8 * 31mm aka uwe; abụọ n'etiti jaket na-yipụ 7 ~ 8mm, gbagọrọ agbagọ n'ime ala waya, na kpuchie na 0.8 * 22mm aka uwe n'otu n'otu; A na-eji aka uwe 2.0 * 15mm na 2.5 * 15mm mee mbepụ etiti ahụ. Ọ dị mma ịkpụ ogologo waya ala. Mgbe ihicha mpụta tube, wee gbaa SR, na tube nke dị nso na mgbama kwesịrị akpọnwụwo tightly.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya